how to apply rhinestone transfer ?

Posted by hw on March 25th, 2020

A rhinestone is made from glass and can be cut to resemble a diamond. Hot fix rhinestones are all rhinestones which were trimmed with flat backs and also have heat-activated adhesive applied to them, which permits them to be heat pressed onto cloth. A rhinestone transport is a set of hot fix rhinestones which were arranged in some sort of design so it could be heat pressed onto cloth.

It will make sure that rhinestone transfer are implemented throughout the plan. Below directions are for a typical, 100% cotton garments.

Establish pressure to"moderate to business". The base of the heat media ought to have a 1/4" silicone mat so the pressure is spread evenly over the full transfer. If a garment is sheer/thin, put a sheet of parchment paper or Teflon sheet within the garment so the rhinestones don't stick through the surface. It might also help stop the"impression" of this layout from showing through the other side of this garment.

The rhinestone layout is"sandwiched" between two layers of newspaper; a transparent coating and a white coating. The clear coating is the cover of the move. The white coating is the base of the move. It's plastic and retains the tacky side of the transparent coating from coming in contact with undesirable surfaces till you're prepared to use the transfer.

Over 1 rhinestone design could possibly be on the move paper. If that is true, cut out on the particular rhinestone design.

Gradually and carefully peel off the white coating from the obvious layer.

Check layout to ensure the rhinestones haven't moved. Use tweezers to replace some that have transferred from place.

Put the sticky side of the transparent coating down on the cloth. When it isn't in the desired place, you are able to gradually lift and place .

Cover the obvious layer using a Teflon sheet and then press 15 to 20 minutes. The Teflon sheet isn't mandatory but only suggested to guard your heating press.

When there aren't any stones which haven't secured with the attire, use tweezers to peel them in the crystal clear layer and set them right in the right place on the garment.

Notes:

The above mentioned configurations are recommended settings and should always be analyzed in your material .

Don't try to use our rhinestone transfer to clothes that may not withstand the suggested heat setting and media time, particularly clothes that state"Don't " or"Don't Dry Clean".

The obligation for the program of our transfers is dependent upon you, the client. We won't be responsible for any problems that might emerge during and following the application procedure.