Structural Composition Of Medical Infusion Three Way Stopcock

Posted by kristamedicalmould on March 26th, 2020

The medical infusion tee consists of a tee, a unidirectional valve and an elastic plug. The upper and side ends of the tee are connected with a unidirectional valve, and the upper end of the tee is provided with a unidirectional valve. The flap lower cover and the side end of the tee are made with the flap upper cover of the one-way valve, and the elastic plug is connected to the lower end.

In order to achieve rapid treatment in clinical work, it is often necessary to open two venous channels for patients. When working with elderly people, patients with repeated hospitalizations, and patients with poor blood vessels, multiple venipunctures in a short time not only increase the patient's pain, but also cause congestion at the puncture site. In many elderly patients, the superficial vein indwelling needle is difficult to indwell, but it cannot be used for deep vein catheterization. In view of this, a tee is used clinically.

Our Three Way Stopcock    was selected by Yuhuan Shengjiu Mould Co., Ltd., a medical device supplier, which can be used for multi-channel and multi-infusion therapy, and it is flexible and unlimited. Choose our products so that you have no worries during use. Welcome to buy: https://www.medicalmould.net/product/transfusion-bloodset-mould/stopcocks-mould/