Enhance LED lifetime with 12V 24V power supply and aluminum channel for LED
Posted by juliabennet on December 6th, 2012
LED or Light Emitting Diode is used in some of the best lighting products that are available in the market. Compare an LED with an ordinary light and you will immediately see that the former is way better than the latter in terms of producing light. Most of the commercial lighting is done through LEDs. And the cost of LEDs has also come down significantly. This is the reasons LEDs have now found large use in the domestic market. Once you buy an LED it seems to go on forever. But you can increase the lifetime of LEDs further by using 12V 24V power supply and aluminum channel for LED.
LED or Light Emitting Diode is a lighting technology that uses a semiconductor chip for producing light. It was first invented in 1962 and a lot of time was spent on perfecting the use of it. Now LEDs are widely used because their prices have come down significantly. But still, you will need to spend more on an LED compared to traditional lighting products. So, when you are spending money on an LED you would want it to last for a long time. 12V 24V power supply and aluminum channel for LED enhance the lifetime of an LED.
Using the right power supply for an LED product is highly essential. When you go online and have a look at some of the LED products you will find that their voltage is mentioned on them. The voltage will either be 12V or 24V. For the LED to work well you will need appropriate 12V 24V power supply and the right driver. If the power supply and the driver are too high in voltage compared to the LED product the LED will burnout. If the voltage of the power supply and the driver are too low the LED will not illuminate at all. Hence, choosing the right power supply and the driver is essential.
Thankfully, when you go out to buy an LED product you get the specification given on the products. And this is constant across LED products. Hence, you will really need to be careless not to choose the appropriate 12V 24V power supply.
The aluminum channel for LED is especially required when you are using LED strips. The channels are used for housing the strips. Along with this the channels also act as heat absorbers. LEDs, although they emit much less heat than conventional lights, still produce some heat. Since the aluminum channels absorb much of the heat the lifetime of the LED strip is greatly enhanced. The brightness of the LED strip will also be maintained for a very long time. The standard aluminum channel for LED is available in lengths of 8 feet and you can cut and size it according to your requirement.
You can easily buy 12V 24V power supply and aluminum channel for LED online. There is no need to go to the market. You can choose the LED and buy the appropriate power supply and aluminum channel for it.
The life of your LED lights will increase when you use 12V 24V power supply and aluminum channel for LED.