Partitioning in Trucks using Van Bulk Heads
Posted by juliabennet on February 3rd, 2013
Space and safety are two primary aspects that need to be taken care of while driving your truck or van; space, because you need to carry utility tools and other equipment and safety, because you need to ensure that the equipment doesn’t pop up and fly around. The solution is readily available in the form of truck ladder racks and van bulkheads. The latter are partitions that separate the cabin of your truck from the space behind that holds all your equipment and tools necessary for work. Usually they come in the form of sheet metal, although wire mesh or wooden types are also possible. These bulkheads prevent your equipment from moving forward and causing an injury to you when you hit the brakes rather hard. The other useful feature of these bulkheads is that they tend to heat up your cab quicker as they are used near the cab and not the whole van.
Truck ladder racks are ones that enable you to utilize the bed of your van for smaller equipment while they take the load of carrying the heavy and the ultra-heavy ones. Ladder racks are one of the common pieces of equipment that you will find when it comes to construction vehicles. Construction jobs and painting requires a lot of load that needs to be moved around and these racks come in handy. They are generally used to carry heavy equipment like ladders and other truck equipment that cannot be easily fitted inside the truck. They come in two different types, permanent and temporary. The temporary ones suit you best if you only intend to use them during emergencies, while the permanent ladder racks should be picked when carrying load is part of your daily routine. Bear in mind that just installing a ladder rack doesn’t give you the license to load your vehicle beyond the limit. If you plan to load your truck to the brim, there is all the more reason for you to install a van bulkhead. This will help avoiding any injury to you just in case the equipment happens to fly around during an unforeseen accident.
Van bulkheads come in different materials, but the ones made from steel, though a little expensive are preferable. They truly serve their purpose of protecting you from injury. Call it firewall or the bulkhead it is one and the same. In some parts it is usually called the bulkhead and in other parts it is called the firewall. Even from an aesthetic sense the steel bulkhead is a better choice as everything around like truck ladder racks and other equipment is made of steel.
To make your experience hassle free, plan the equipment you need and install all the accessories including your van bulkheads, winches, truck ladder racks. There are plenty of other accessories with additional functionality available in the market. You can install everything at once when you buy your truck with the help of an expert or look for opportune moments, when you get the next equipment based on need.
Are you looking for truck ladder racks or van bulkheads? Please visit our website for the best truck and van equipment.