Skateboard bearings for long life

Posted by longboarddecks on June 17th, 2013

Skateboards are increasingly popular among people in recent years. It is excellent for entertainment. Increasingly people like it and try to learn how to skate. It is especial welcomed by young people. It is of the crucial parts of skate wheels. Besides, it helps to generate a smooth comfortable ride. But all depends on maintenance of the bearings of the skateboard and other crucial parts. Individual bearings contain tiny balls made of steel or ceramic, housed in a case called a raceway, with each wheel having bearings. Since skate wheel bearings are so important to the skateboard, its maintenance ought to become your concerns.

Lubrication is obviously of the nice maintenance methods. It is basic skateboard maintenance that you ought to know. It can extend the service life of your skateboard. Therefore, if your skateboard is riding rough and your wheels appear to be sticking, it is time for you to oil it. And you can refer to some instructions. At first, you may must remove the skateboard wheels by inserting the skate device in to the pocket of the wheel and turn counterclockwise, exerting firm pressure until the wheel comes loose. Remove any bearing shields and spacers from the wheels.

After that, you ought to remove the bearings from the wheels, and slide each free wheel back onto the Axel. Use the skate tool to hook the Axel and press down firmly so that the bearing comes free. Thirdly, you may must place the bearings in to a container filled with mineral oil, and permit them to soak for to hours. Then you can scrub them with an old toothbrush to get rid of all the built up grunge after taking them out. When bearing products are thoroughly cleaned, you need to place a little amount of skate wheel oil in to the middle of your palm and drop the ball bearings in to it. Roll the bearings around your hand until they are well coated.

In addition to the lubrication, the bearing replacement is as well as a method maintenance system. Of course, in the event you need to do this by yourself, there are also lots of steps for you to refer to. Main instructions are as follows. You ought to make use of the skate tool or Allen wrench to remove the axle from the wheel, and remove the wheel from the frame of the skate. Remove the old bearings with a skate tool. Then you ought to place the new bearing in side of the wheel. Push it in place as far as it will go, turn the wheel over, replace any spacer that was originally on the wheel and insert the bearing on the other side. The last step you ought to do is that you may must place the wheel back in the frame and insert the axle through the wheel.

About the author: The author is an expert in skateboard complete and shares his experience here. He focuses on the cleaning and maintenance part of boards.