best carbon fiber sheets get online

Posted by Abbot Ace on November 11th, 2020

Have you purchased 3M Di-Noc-like carbon fiber sheets for your car interior trim and you don't know how to apply them? If yes, then this guide might be a pleasant surprise for you. Carbon Fiber Vinyl Sheets come in highly custom packages and cannot be returned once sold. Therefore, it is very important to apply them correctly on the first try. Read below to discover the step-by-step process to install carbon fiber sheets in your car:

Begin by thoroughly cleaning the surface where the application will be applied. Even the presence of a small amount of dirt can affect the adhesion of the vinyl sheet. Carbon fiber sheets adhere well when the application surface is textureless and smooth without a single speck of dirt.

Once the surface is clean, take out the carbon fiber sheet pack you ordered for your car. Be sure to carefully unwind the fiber film without damaging it. As you unroll the sheet of vinyl, place it on your lap, sitting upright. This will allow you to easily work with the sheets while applying them to the interior of your car.

Trim the unrolled sheet of vinyl to the approximate size you want and then begin the process of gluing the sheet to the application area.

As you apply the sheet to your area of ​​application, be sure to press down on the sheet correctly so that it sticks well to the area.

Once the application process is complete carbon fiber sheets, use your fingers or the head of a pen to trace an outline around the application area shape.

Once the outline of the application area is clear, remove a sharp utility knife or equivalent instrument and carefully trim the additional sheet of vinyl placed around the area.

As the excess carbon fiber vinyl sheet is removed, you are ready to admire your new clean and shiny carbon fiber look.

As you place the carbon fiber vinyl sheet inside your car, be sure to press the vinyl sheet at least 1 inch behind the area of ​​your application. By doing so, you can make sure that the fiber sheet adhesive sticks well to the area. If the fiber sheet is not folded correctly, the sheet may come off after a certain period of time.

You can also use a heat gun to stretch and glue the vinyl sheet over the curved areas of your car's interior.

By following these tips, you can apply carbon fiber sheets to your car with ease!

For more information on 3M Di-Noc grade carbon fiber wrap and where else you can use it to decorate your car, visit iJDMTOY.com, the super store for LED automotive lighting.