Why Should One Hire Experts for Chimney Repair & Gas Fireplace inserts in Fremon

Posted by mister-chimney on November 12th, 2020

Chimney problems are stubborn and are not going to go away on their own. They need professional attention and care. The chimney flashing can be the real trouble spot. Besides, a chimney can suffer plenty of other problems as well.

Obstruction:

One of the most common problems is chimney obstruction or blockage, usually caused by the chimney draft's obstruction. If the chimney does not have sufficient height, an ambient updraft can block the passage of smoke and prevent its release.

Chimney blockage is worrisome. It allows toxic fumes such as deadly carbon monoxide to enter the home.

Creosote:

Whenever wood is burned in the fireplace, smoke issues from the chimney and flammable creosote gets accumulated in the flue lining. Creosote contains a black or brown tar and soot, which is a fine carbon powder. Creosote comes in three forms – all of which can cause a dangerous chimney fire. Thousands of house fires caused by dirty chimneys are reported every year. Chimney repair in Redwood City and San Mateo, California, can help fix all these issues efficiently and quickly.

Brick Problems:

Unresolved issues can cause the chimney to lean, crumple, and collapse. Maintenance is required to keep the damage caused by water to a minimum. Tuckpointing is one technique chimney professionals frequently use whereby damaged mortar is eliminated, and the new mortar is installed to give the stability and protection of the chimney it needs. Sometimes, brickwork suffers damage because of moisture, thereby calling for a replacement. Repairing is, of course, far less expensive than having to replace a collapsed chimney completely.

Chimney Crown and Chimney Cap:

The top of the chimney is called a chimney crown, which often becomes cracked, therefore, needs to be repaired to prevent water intrusion into the chimney system. Moisture is the biggest culprit to the chimney system and can affect the masonry, lining, firebox, damper, ceilings, and walls in the home. To protect the chimney from moisture, it is always advised to install chimney caps, which sometimes need to be replaced.

Cracks in the Flue:

Chimney linings are easily affected by a lot of stress, including heat and deposits of flammable substances. If moisture combines with the creosote, the lining can become worse. When a lining develops wear and tear, it needs to be replaced before using the fireplace again since the lining protects the combustible parts of the home from catching fire.

It can be tough to determine whether a flue is in good shape. Using a camera that shows every detail of the flue, from top to bottom, is recommended. The professionals use their tools and techniques to determine if the flue is in good condition or the lining needs to be replaced.

Homeowners often forget about their chimneys. By the time they discover the problems, the chimney is almost gone. So, on-time inspection and repair are necessary. The same applies to gas fireplace inserts in Fremont and San Francisco, California. Be it chimney or fireplace, be sure to have them inspected and fixed before it's too late.