WHAT TYPES OF MATERIALS ARE USED IN WHEEL CHOCK?

Posted by Ergo Wheel Chock on November 24th, 2020

 Wheel chock is a smaller size of wedge that is made up of plastic, rubber or wood. It is designed to stop any vehicle from rolling or moving inadvertently. Wheel chocks are likewise called tire chocks, wheel blocks, trailer chocks or wheel stops.  

Ergonomic Chocking Wheels are significant because brake alone isn't sufficient to shield a vehicle from moving during a towing position. It's additionally essential to balance out tires and vehicles when they're being shipped.

KINDS OF WHEEL CHOCKS:

Types of wheel chocks are divided into four parts. Let’s discuss all these:

•Types of material used in Ergonomic Wheel Chock

Here are few types of materials that are used in making wheel chock:  

1.Rubber:

Durability and affordability of rubber are the most well-known features that make it applicable for wheel chock. Rubber isn’t affected by the environmental climate like water and wind. That is the reason elastic wheel chocks are utilized inside, for example garages and warehouses.

2.Aluminum:

Aluminum chocks are substantial, and can be utilized with vehicles and trucks with a high gross vehicle working weight. Some aluminum wheel chocks are explicitly intended for storing and are important for a unit intended to mount a bike or vehicle.

3.Steel Alloy:

It is the strongest material that is best used in the heaviest vehicles. Although, steel alloy chocks are a bit expensive but it is best for heavy weight vehicles. Additionally, there are chances that steel can get rusted, so it's important to take proper care and regular maintenance of steel alloy wheel chock.

4.Polyurethane Plastic:

Polyurethane plastic is one of the most preferable materials for wheel chock. The primary factor that they are used in wheel chocks is hard safety.  Polyurethane Plastic provides better safety from cuts, gruff harm, water harm, and wind harm than rubber made wheel chocks.  Polyurethane Plastic is also lighter in weight than rubber or aluminum.
Plastic wheel chocks are not as high-quality as aluminum or steel chocks.

•Surface appearance of Wheel Chocks

Given below are few surface appearances of wheel chocks

1.Aluminum Teeth:

Aluminum Teeth are used on the lower part of a tire chock. It is best for muddy or gravelly surfaces.

2.Diamond Plating:

Diamond plating in wheel chock is used for increasing the friction. It will also help in gripping the wheel and is designed to work well with a tire's tread.

3.Serrated rubber or plastic:

These finished tire chocks are some of the time called "pyramid-style" chocks since they look like little pyramids with "steps" running up the sides.

•Wheel Chocks size

Four types of sizes are there in wheel chock that must be considered.

1.The steepness of a chock's grades
2. Limit of working load.
3.Length and breadth

•Additional Features that are applied in wheel chocking are

1.Handles.
2.Loop Handle:
3.Eye Bolt:

WHEEL CHOCKS ARE USED IN VEHICLES FOR MANY REASONS, HERE ARE FEW:

•Auto-pulling/moving a vehicle or tires
•Towing
•Vehicle repairing
•Storing tire or vehicle.

Are you searching for the best place for wheel chock? Don’t go anywhere if you are at KENDALL INDUSTRIES.