Why choose heavy duty racks

Posted by sere on November 30th, 2020

The choice of heavy duty racks generally depends on the size, weight and type of the warehouse, and the purpose of the warehouse. It is made of cold rolled steel and can be stored in large warehouses and heavy goods in large warehouses.

Although the storage density is relatively low, but the load-bearing weight is large, equipped with pallets and various accessories, it can also be used for mechanical storage, which can solve the problem of access to most commodities and is widely used in manufacturing, third-party logistics distribution centers, etc.

In fact, heavy-duty racks have many advantages: the column is prefabricated, and the steel card is inserted between the beam and the column, and it is locked with a key to prevent it from falling off. Fully assembled structure, can be combined arbitrarily, easy to install and disassemble; each column has a 75mm adjustment hole, which can be adjusted according to the height of the goods, suitable for storing large or small amounts of goods.

Heavy-duty shelves can make the storage of goods present a three-dimensional management state, and make warehouse goods management clear. When combined with forklifts and ladders, warehouse management becomes simple. The uprights are made of hot-rolled steel sheets at several angles and are heavy. Overload: The weight of each layer shall not exceed the maximum load of the shelf design to prevent top-heavy.

Anti-collision: The forklift should be handled with care when operating. When placing the goods on the top of the shelf, the operator should try not to put it on the bottom of the entering shelf. The height and width of the shelf are limited. The size of the cardboard and cargo should be slightly less than 100 mm.

Heavy-duty racks are low-cost, safe and reliable, easy to disassemble, and suitable for manual access. When the goods are stored very high, corresponding loading and unloading machinery is needed. The use of heavy duty racks should be standardized, including the safe use of forklifts and the orderly placement of goods. Only in this way can it perfectly reflect its advantages of fast access speed and space saving.