How to deal with excessive noise of industrial electrostatic precipitator?

Posted by hw on December 3rd, 2020

Generally at home we are using the dust control of the robot, but the general is the use of high-power susceptible to noise in the factory of the industrial electrostatic precipitator, if industrial dust collector should be how to solve the noise is too high, then by Dr. AIRE electrostatic precipitator manufacturer to introduce the industrial dust treatment method of noise is too large.

Solutions to excessive noise of industrial electrostatic precipitator

1. The muffler

This is the most common method used in many factories. The dust collector is passed into the pipe through silencer during operation, which avoids the direct transmission of noise and thus reduces the interference of noise.

Design of 2.

Dust collector with noise reduction design can be selected. Generally speaking, the noise transmission of dust collector can be reduced by reducing the impact of airflow as far as possible in terms of aerodynamic performance.

3. Put it in the right corner

Generally located in remote corners of the factory and designed with muffled louvres, the noise can be reduced.

Maintenance skills of industrial electrostatic precipitator

First, after using the vacuum cleaner, there will be a lot of garbage and impurities in the equipment. It is necessary to take out the garbage and impurities in time to keep the bucket clean.

Second, the filter also needs to be cleaned in a timely manner, the filter is too dirty will affect the vacuuming effect. When cleaning the filter, you need to wait until the filter net is completely dry before you can use it.

Third, industrial vacuum cleaners, after using need to set up the wire banding together, hanging on the hook, avoid by all means do not casually throw on the ground or the wire is random roll into a ball, it's very easy to damage wire skin, wire breakage of epidermis, then can appear in the use of equipment is the leakage phenomenon.

Other parts also need to be checked regularly, such as vacuum hoses, motors, etc., which need to be paid attention to. If they break or wear out, new software can be replaced.

Selection techniques for industrial electrostatic precipitators

1, can choose according to processing gas quantity, process gas quantity how many actually are also determinant factora in size and type dust collector, select processing volume larger dust catcher is undoubtedly the most appropriate, if using multiple processing small and joint use of air filter is often not realistic nor economy, when the filter into the actual operation, there may be affected by operation and the influence of environmental conditions on the part of it is not expected, so we when deciding the capacity of the equipment, can guarantee a certain allowance or reserved some space of the equipment;

2, according to the density of dust dispersion and to select, dust dispersion effects on filter performance is relatively large, and is the same as the dust dispersion, but also can have certain differences due to the different operating conditions, the selection of industrial electrostatic precipitator, to understand exactly dust dispersion, such as when the particle size of more than 10 microns in more optional cyclone; Electrostatic precipitator and bag-bag precipitator should be selected if the particle size is more than one micron. Specific selection can also be combined with other requirements for purchase.

3, dusty gas temperature for selection has a certain influence, you know, the basic principles of dry type industrial dust collector is established under the dusty gas above the dew point temperature, and in the wet precipitator, as a result of water evaporation and condensation of emissions to the atmosphere after reason, also should be operated under the condition of low temperature treatment as soon as possible.