Ensure Comfort during winters with Proper Attic Insulation

Posted by Fourseasonsinsulation on December 8th, 2020

Cold regions often witness chilly weather throughout the year. However, the temperature gets worse during winters, making it impossible to spend a second without heating equipment. This makes it imperative for every household in those regions to make the most of the natural heat in their house.

Nevertheless, without proper insulation, holding in the heat is one of the major problems that houses in cold regions face. The proper way to install attic insulation is by hiring professional and experienced attic insulation services in Mississauga. These people have the necessary equipment like thermal cameras to help recognize the cool spots in your attic.

Although it is very easy to cover the holes, if you have old insulation and haven’t changed it in a while, it is time to invest in attic insulation replacement services. This is mainly because just filling the holes in your attic might cause the same problem next year. With an expert service provider, you will not only save time but also save money in the long run.

What Is Your Home’s R-Value?

Before starting with the process of insulating your home, you need to determine what R-value is recommended based on your location. The Department of Energy can help you gather this information. R-value is typically the resistance value of the insulating material your house will need.

Usually, an attic's R-value should be somewhere around R-30 to R-49. However, in chilly areas, this figure might go up to R-60. For instance, if your house has an R-value of three per inch, and you need to achieve R-36, then to achieve that number, you will need 12 inches of insulation material.

What Are Some Popular Insulation Options You Can Choose From?

Before you plan on investing in insulation services, it is better to know about the most common options available on the market. This article further explains some options you can find for home insulation in Mississauga.

1. Blanket Insulation:

Considered to be the most popular choice, blanket insulation is one of the simplest DIY insulation materials. It is available as rolls or batts in mineral wool, Fiberglas, natural fibers and plastic fibers. This is absolutely appropriate for attics that have standard spaced joists and beams as well as fewer obstructions.

Blanket insulation has a rather easy installation process. Firstly, the batts have to be carefully trimmed and fit securely around the open spaces and vents. This further helps retain the R-value of this material which is somewhere around 3.1 to 3.7 per inch.

2. Loose-fill Insulation

Known for fitting in attics with multiple obstructions such as cross-beams and vents and little headroom, this is the second most opted type. For installing this type of insulation, you don’t need to take off your existing insulation. Loose-fill insulation can be blown over the pre-existing insulation in your attic, making it relatively cheaper to install.

It is available in three different materials: cellulose, mineral wool and fiberglass. While cellulose is the most effective with an R-value of 2.1 to 3.7 per inch, it is also most prone to molding when exposed to moisture.

You should know the higher a material’s R-value, the more effective is the insulating material and vice versa.  Measured by the material’s thermal resistance, this is an important step in deciding how much insulation your house requires.