Resurfacing a Concrete Driveway

Posted by Thomas Shaw on December 9th, 2020

More than time you're going to discover that your concrete driveway develops cracks in it, this is largely the result in the weather and the wear and tear of driving on it. Previously when you got cracks within your driveway the only technique to repair them was to rip it up and pour a new surface. This really is not needed any extra because the cracks could be filled plus the driveway resurfaced very quickly. It's a job that you just need to be in a position to do by yourself which will assist towards the maintain the cost down. Get additional info about Epoxy Garage Floors



The first thing that you are going to wish to do as a way to resurface your driveway should be to make certain that you clean it. The driveway needs to become clean in order for the resurfacing to become successful. Using a pressure washer is definitely the best technique to make certain that you get it clean. In case you have any oil stains in your driveway you will need to work with a degreasing agent to have them off. It's also essential that you clean out the cracks that you just plan to fill. Scrape them out as very best you can and then pour a modest level of bleach in to the crack. Just after about ten minutes take your pressure washer and spray the cracks out.



To be able to fill the cracks you are going to wish to use a concrete dressing. For modest cracks you are able to use a putty knife to force the dressing down in to the crack, for larger ones you'll find that a caulking gun operates greater. In either case after the cracks have already been filled use a putty knife to smooth out the dressing.



Once the cracks are filled you are going to must cover the expansion joints. They are the lines that divide the concrete of your driveway into sections. They're there so that the concrete can expand and contract because the weather adjustments. You should be sure that these expansion joints stay in place so you might choose to cover them with duct tape.



The subsequent step would be to mix the concrete dressing; you'll want to follow the instructions around the bag for that. You will need somebody to help you unless you will be performing just an incredibly small location. The concrete wants to be mixed in tiny batches and applied rapidly. For any driveway you'll need to possess one individual applying the concrete dressing although the other is mixing the next batch. You wish to get the complete driveway covered ahead of the dressing begins to dry.



As a way to spread the concrete dressing you can would like to pour it onto the slab after which spread it out. When you are undertaking just a compact region the most beneficial solution to do it is actually with a trowel, for massive regions a long handled squeegee could be the ideal bet. In either case ensure that you push down tough so that you are able to get the concrete dressing into all the crevices, this will likely make sure that you've a good smooth surface.



Once you are resurfacing a driveway you don't want the concrete to be smooth, your driveway ought to have texture to it. The way that you simply do this would be to take a bristle push broom and pull it across the concrete dressing whilst it is actually still wet. This will likely ensure that you get a textured surface that can be slip resistant.



The final point which you will need to have to complete is always to get rid of the duct tape which you had covering the expansion joints. You will need to stay off of the driveway for the subsequent six hours even though the dressing dries. Following twenty four hours you'll need to be put a sealant on your driveway to safeguard it.