Hole Depth Articles

1,284 items found while searching for Hole Depth Articles.

A breakthrough in hole depth measurement in open cut mining
4th June 2016 : For many drill and blast operations, the state of the art in hole depth measurement for blast holes is the dipping tape or tape measure. While this is not necessarily such a bad thing, the data that is collected is not easily recorded and shared. At best this data is entered into a tablet or PDA. These devices face many challenges in surviving the rigours of open cut mining. The dust, mud and chemicals present in drilling and blasting mean that the failure rates of these devices in often fairly high. In addition to this, the form factor does not allow them to be used easily by ...

Milwaukee M18 FUEL 1/2″ HOLE HAWG VS Milwaukee HOLE SAW
M18 FUEL 1/2″ HOLE SAWThe Milwaukee Hole Dozer Hole Saw Fastening house atlanticstructures Rip guard, the toughest tooth form present in the industry, supported by the Rip guard limited lifetime tooth breakdown warranty. Every tooth is manufactured with more steel behind the cutting edge for additional forte. The Rip Guard warranty on tooth breaks is the first time its been offered in the hole saw industry. The additional tooth strength alongside 8% cobalt gives even more life to the teeth, permitting for elevated productivity on the work site, as well as consistent hole quality. ...

Drill and Blast optimisation tools
There have been significant advances in the pursuit of getting accurate information on the state of the blast hole before blast loading. All these advances have been made because there are clear benefits to knowing the hole depth and water depth measurement. This information provides the drill and blast engineer or shot firer with information to ensure that the optimal blast loading can be performed. What is the current state of the art? Drill rigs can capture the depth of the hole that is drilled. The problem with this that the bench on any open cast mining site is never really flat and as ...

Hardrock Blast hole drilling rig
Hardrock Blast hole drilling rig is used most frequently in the mineral exploration industry among all the mining drilling equipment. This blasting rig is penetrating the rock via a air driven hammer and hammer bit. Its power supply comes from independent air compressor or on deck compressor or rock drill. The cuttings is blown out of hole by air It normally requires mining drill rigs have capacity of 15- 30m depth with 100 – 200mm blast hole diameter. Hardrock blast hole drill machine is dedicating to offer Mining Rigs with the latest and most advanced technology to ensure the ...

The operation instructions of converter furnace tap hole
1.The maintenance standard of tap holePlease ensure there is no deformation of the tap hole and meets the requirement of slag stopping. Tap hole brick should be horizontal and its shape should be round.The diameter of tap hole should be less than 140mm, the length should be more than 400mm. Tapping time should be more than 1 minute and 30 seconds, or it should be replaced.2.The maintenance operation of tap holeBefore removing tap hole after using, use ring rolling machine to clean out the remaining sleeve and slags, if there is steel remaining, use oxygen lance.Place the precaste...

Must-Know Family Travel Guide and Jackson Hole Wyoming Vacation Packages
Since summer is on the way, many families are hitting the road to go on vacations. Jackson Hole is a unique and fun destination to collect some memories with loved ones. Situated in the western part of Wyoming, this place is largely known for getting exotic experience in the arms of nature.Jackson Hole is a perfect place for people who want to experience horseback ride, Golf, Tennis, Rock climbing, Fishing, and a lot more. Considering this, it would not be wrong to say that there is something for each and every person.  Before heading for a bag pack, it is imperative to know about Jackson...

Furnace Bottom Tapping Hole Fillers---Refractory Castable---Refractory Material-
Furnace Bottom Tapping Hole FillersIntroduction and Application:Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our company is adapted to the need of increasing gradually in large-scale furnace in recent years, an ideal product to replace imported products. The steel outflow from eccentric furnace, put electric fillers in at EBT platform, when the steel stuffing can outflow from steel pore while steel water flow into ladle. Automatic free-opening rate can reach over 90%.Content source:http://www...

Deep Hole Drilling Machine Engine Valve
K8-6-300S CNC deep hole drilling machineHave the identification of CE and OMRONApplication for engine valveCnc deep hole drilling machineHole size:2-8mm ,  Max. hole depth:300mm,Drilling method:gun drill Tool method: rotary Workpiece method: rotary Clamping method: colletFeed rate:6000mm/minNumber of spindle:6; processing 6 engine valves one time Spindle speed:2000-8000rpm Control system:Siemens or FanucAdvantages:3 Axle;Loading and unloading system Filtration accuracy system Automatic chip remova...

Deep Hole Drilling Machine Glass Bottle Mould
A series of deep hole drilling machine tools in the drill diameter range of 1.5-20mm and drilling depth up to 1000mm for off –center drilling micro gun drilling machine can be provided with 1,2,or 3 spindles. configuration depending on drill diameter specification.  All machines will be supplied fully guarded according to the CE specificationsDrilling coolant hole on glass bottle mold requires special knowledge on machine design.HTT KBA series twin spindle, knee type gun drilling machine is the most cost effective machine for glass bottle mold manufacturing.KBA series has p...

Hole In One Insurance: A perfect shot for hole-in-one coverage
The hole in one contest is a kind of event or can be known as an add-on to an event or tournament. The golfers attempt to make Hole-In-One and the winner takes away a brand new car or million dollars. Hole-In-One contests are generally organized to raise fund for charity. They get fit in the professional or amateur tournaments. Most exciting moments can be witnessed during the play. Hole-In-One can give an outstanding publicity because of the prizes which are offered. Sometimes, the price can include new cars and a large amount of money. For the golfers, Hole-In-One is extremely rare but an i...

1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 | Next | Last

Link To Directory
Top Searches - Trending Searches - New Articles - Top Articles - Trending Articles - Featured Articles - Top Members

Copyright 2019 Uberant.com
519,415 total articles and counting.