Tops Tips For Maintaining Welder-Generator

Posted by Ronan on March 16th, 2021

It is common to come across the application of an engine-driven stick welder generator as it offers better durability and reliability. But, it is vital that welder-generators are regularly maintained too. After all, maintenance is key to get the most out of every penny invested in heavy-duty tools. 
 
So, let’s take a look at a few tips that will keep your product running strong for years. 
 
1- Oil maintenance:
Kohler-powered trailblazers and bobcats have an air-cooled design that makes maintenance simple because it has no other cooling system present. But, since the oil acts both as a coolant and lubricant, it is vital to change the oil, filter and maintain the oil level. It is better to always check the oil level before starting the engine. 
 
2- Check the coolants level:
Some welder generators like the Kubota diesel engine is equipped with the most durable engine components, but you may need to pay attention to their liquid cooling system. It is wise to check the coolant levels and follow the product-specific procedures if you require draining or filling the coolants. 
 
Also, don’t forget to inspect the radiator for debris or clogging. Opt to clean with high-pressure water whenever needed but away from the radiator fins. 
 
3- Change the filters:
When it comes to gasoline engines, ensure to check for clogged filters regularly because that may cause running issues and decrease the total usable life span within a few months. So, if you fill oil from above ground storage tanks, you may come across excessive dirt. And this dirt will eventually cause clogging of fuel filters, thus reducing the flow of the fuel and hindering engine performance. 
 
Over to you
So, there you go. These are some of the things that you must look after in your engine driven stick welder generator.