Why Is Your Plumbing Noisy? Common Causes and How You Can Fix Them

Posted by Tri City Plumbing and Heating on April 2nd, 2021

A noisy plumbing system indicates that something is wrong and that you should investigate further. Try to notice what kind of noise your plumbing in Coquitlam is making. Is it a loud banging noise? Can you hear whistling sounds? Knowing this makes it easier to diagnose the problem.

Loud Banging Noise

When it comes to plumbing noise problems, this is the most common one. Check to see if you have low water pressure first. If you have low or high water pressure, you can use a pressure regulator to fix the problem. You can hire a professional to install a pressure regulator.

If you have a modern home, chances are, the banging noise could come from the water hammer effect. This is when the valve has been closed suddenly. Water making its way to the exit areas of the plumbing in Coquitlam can suddenly halt and the pressure could lead to the banging noise.

Your plumber can install an arrestor to prevent this from happening. This deflects the “hammer” so that it doesn’t hit the valves.

Rattling Noise

Most homes have plumbing systems installed behind a wall. However, there may be some exposed pipes that are only secured with plumbing fasteners. Over time, the movement in the pipes can cause these fasteners to loosen up. Whenever water runs in these pipes, they will cause movement, which can lead to the rattling effect.

Older homes that make use of copper pipes may also suffer from expansion due to hot water and this can lead to a rattling noise as well.

Humming or Vibrating Sound

One common reason why this happens is the high water pressure in your home. It can no longer be accommodated by the pipes, hence the vibrating action. You might often hear this humming noise whenever you open a faucet.

This is also a common occurrence for homes that make use of well water. If you store well water in a tank, check to see how much its PSI is. Make sure it’s not above the 55 range.

Whining Noise

This is most likely brought about by plumbing parts succumbing to wear and tear. For instance, if the nuts and bolts or washers in the pipes have come loose, they might be the reason why your plumbing stem is making a lot of noise.

What can you do? Do these noises indicate a plumbing emergency?

Once you notice these problems, you should check how often you hear these noises and if they are being disruptive. It’s best to hire a professional from Tri-City Plumbing & Heating to check your problem and make a clearer diagnosis. The older your home is, the more that you should have it thoroughly inspected by professional plumbers.

Aden Taylor is the author of this article. To know more about Plumbers in Coquitlam please visit our website: tri-cityplumbing.net