How To Change Chucks On Jet Lathes

Posted by Henry.Wilsonn on April 8th, 2016

Thousands of woodworkers and carpenters rely on JET lathes every day for a range of applications and jobs. JET offers sturdiness, durability, performance and value in a single package. It’s hard to find a better deal than JET’s offerings. Furthermore, if the tool or piece of equipment suffers any damage or depreciation, your investment remains safe as you can buy JET lathe parts on various online stores as well as brick and mortar stores. Reparability in expensive machines is a crucial factor and when it comes to JET’s products, that’s not a concern and that’s one of the reasons why so many craftsmen, whether amateur or professional, choose JET over other brands.

This article tells you how to replace a chuck on a JET lathe. Follow the steps listed below in order to replace the chuck in correct manner.

FIRST REMOVE THE CHUCK BOLTS

There are 3 markings by these bolts, one in a straight line and two V shape. These markings and additionally the score on the bolt are utilized to tell if the chuck is connected or not. When the indent is in the middle of the two V’s the toss is effectively fixed. The indent can change precisely where it is between these two V's yet the length of it is between them, the chuck is legitimately mounted.

To release the bolts and uproot the chuck you turn the bolt counter clockwise until the score adjusts to the straight line. At the point when the score on the bolt and the straight line are in arrangement then the toss can be expelled from the machine. Chucks are to some degree heavier than other parts and in the event that you have any questions that you may drop the chuck use something like a bit of wood to ensure the routes or to have something to lay the toss on when you evacuate it. When you have ensured the ways you can utilize a metal mallet to slacken the chuck and after that force it off.

MOUNT THE REPLACEMENT CHUCK

Remounting a chuck is just about the precise inverse of removing. Adjust the three mounting sticks and slide the new chuck onto the machine. Fix the greater part of the bolts until the bolt scores are all in arrangement with the primary V and after that proceed around fixing the majority of the bolts until they are hand fixed and the indents are all some place in the middle of the two V's.

IF LATHE CHUCKS ARE LARGER IN SIZE

For bigger chucks and screw on chucks we prescribe making a wood support that is indented to fit the machine ways. Notwithstanding supporting the chuck it likewise makes arrangement much less demanding.

One thing you might not notice is to dependably examine and clean both the axle and the chuck before mounting to guarantee that there are no chips to bring about misalignment. A light layer of oil before introducing the chuck is not a bad thought either.

ToolpartsPro.com offers you to buy Jet replacement parts, Jet lathe parts and Jet drill press parts on lowest online prices.