Welcome to know tips in the use of ladle steel flow initiator

Posted by annesheldon on May 9th, 2017

Tips in the use of ladle steel flow initiator:
1. Due to the ladle steel flow initiator in the ladle nozzle for a long time high temperature state, requiring a high degree of refractory sintering.

2. Due to ladle steel flow initiator filled into the outlet directly after contact with molten steel, the initial sintering temperature should not be too high.

3. Ladle steel flow initiator in the use of the process to withstand the large static pressure of molten steel, in order to prevent the collapse of the material, requiring raw materials with very good mobility, ladle steel flow initiator particles between the friction should be as low as possible.

4. Under the action of high temperature, control the appropriate drainage of raw materials, the volume effect of raw materials to prevent the use of the process in the production of ladle steel flow initiator can not automatically fall or can not effectively support the upper material.

The article source: http://www.chinafirebrick.com/Company_News_121.html