Regular Maintenance Of Pet Preform Mould
Posted by preform nicole on November 30th, 2018
Regular maintenance of Pet Preform Mould is important to extend mold life. Due to the working environment of the injection mold, high pressure, high temperature and frequent clamping and sliding, it is ultimately useless for long-term operation, so it is necessary to manufacture new one after another. Anyone interested in plastic injection products knows what the disaster would be like if the mold always had to stop and repair.
For plastics manufacturers, the importance of a perfect mold cannot be overemphasized (as is the case for mold makers). As you can see, it affects the company's development, such as unnecessary costs and poor branding of inferior products. Under normal circumstances, no one is willing to buy from you. No change, no life.
To eliminate these concerns, you must pay attention to some very important issues:
1. Mold design
2. Mold tool
3. Regular maintenance of the mold
Regarding points 1 and 2, it should be controlled by the mold manufacturer. For you, you can also do something to extend the life of the injection mold, which is the third point, which can help you maintain more than other irregularities. People save a lot of money. It includes the correct tool assembly and disassembly procedures. List some for your reference now:
Routine maintenance
a. 1. Check and clean the two parting surfaces.
a. 2. Connect and test the cooling channel should be OK.
A. 3. Check the heating system according to the human resources directive.
a. 4. Add enough lubricant to make the core pulling action smooth.
B. 1. Check and clean the two parting surfaces.
b. 2. Clean the venting groove.
b. 3. Connect and test the cooling channels on the seal guard.
Remove, lubricate and replace the core tie rods, sliders and tappets.
B. 4. Inspection of the tool parting surface joint.
Finding the right Pet Preform Manufacturers according to your own needs, you can use the current Internet to search in the search engine, I believe you can find the best answer in mind.
