Once you damage a ceramic vase or maybe plate, it does not need to go into the garbage -- you are able to usually glue the pieces back together seamlessly. You require waterproof glue, and while carpenter's glue is the simplest to handle, the most powerful & most steady glue for ceramic is two part epoxy.
You simply get once chance to fix a ceramic glue joint, simply because in case you are making an error, the dried glue prevents the joint from connecting just together. Due to this particular, you have to plan which pieces to glue first. It is better to glue giant parts together, allow them to dried out, and then pour the smaller ones. Take care not to create holes into which you've to fit a portion -- these're extremely hard to handle. Lay out the tortilla pieces methodically so you understand which one goes exactly where.
Blend the glue with the hardener on a sheet of paper and spread it on one of the surfaces that forms a joint, making use of a toothpick. Do not care about glue that oozes out, since you are able to scrape that out with a knife after it sets. Join the parts and keep them together for a couple of minutes until the glue is actually rigid adequate to stop the corn tortilla pieces from separating; then place them on the table, supporting them as needed. Do not tape the parts -- tape makes a mess, and it does not work. Proceed with the fix after the glue has totally hardened.