Everything You Need To Include In An ADA Specified Restroom

Posted by Michael Griffin on October 24th, 2019

Disability of any kind should not be any reason for any person to not enjoy the basic services and life in general to the fullest. Disabilities assisting features are nowadays offered at most commercial and even residential places which is a sign that people are realizing the importance that installing such features is not only a necessity but appeals to the basic humanity of helping one and all. To further help with endeavor, the US government in 1990 instilled the Americans with Disabilities Act or ADA in their constitution to facilitate the ease of access and usage of various places and items across the country. This law essentially bars any discrimination of any kind of disabled and gives them the same rights as any other person.

One of the biggest advantages here was the installation of disabled-friendly accessories and systems in restrooms and bathrooms everywhere. But some people are still not educated as to what entails in such a scenario and how to get it done. To get educated and further gather some knowledge about this topic, read on below to find out what an ADA compliant restroom needs and what to do about it.

Prior to starting any work for new construction or making changes, go through the guidelines that are stated in the ADA which are given below

The distance between the toilet and the wall must at least 20 inches.
There should be clear circles on the sidewalls and at the back wall of 60 inches to help turn the wheelchair since revolving doors cannot be installed.
Sink accessibility is important and should be at least 30x48 inches and a clearance of 27 inches from the knees since there will be no revolving doors involved here as well
The toilet seat’s height should be at least 17-19 inches.

The above-stated measurements are generalized based on the data at hand. But if talking about specifics, check out what should be done for doors, stalls, faucets, etc

Doors

ADA compliant doors require the door to be lightweight, have handles at both ends the person can grab onto and also open up to 90 degrees. Also, the pathway should be wide enough for people to easily move in or out. One can add further accessories and make changes to make their bathroom use for comfortable and easy.

Faucets

The sink being installed should be at least 30 inches above the floor and should be able to clear the knee, a minimum distance which is kept at 27 inches. The sinks, however, should be able to be controlled by a single hand and include either levers, a push button, sensors or some electronic technology. The force used to operate the faucet should be minimal and kept under 5 pounds.

Stalls

Whether the urinal is in a stall or a hung fixture, it should installed be no more than 17 inches from the floor. Similar to the faucets, the flush operating levers, if installed should not require much force to operate and be operational by one hand.

The key to a successful construction or remodel of an ADA guidelines specified restroom is that one should thoroughly research what all they will need to get the job done, even though the contractors will have the knowledge and expertise in this regard to executing the job properly. It will serve you better knowing what all is involved in the construction process and familiarize yourself with how the equipment works. This will better help you serve disabled people or help them out if need be.

Apart from installing such items, one can also customize their bathrooms as well accordingly, replacing some part of the flooring, showers, handrails, etc. and while searching for handicap showers in Denver or wherever you reside, you will get the top providers of this service but always look around for yourself before picking the contractor for this job since that will help you make a better and informed choice.