Easy Steps For Anyone Who Wants To Paint A New Home

Posted by Catnip on December 29th, 2019

Probably the problem that everyone encountered Because there is probably no color that stays for a long time And when it's time for the old house. We, the house owner, have to repaint. To make the house look as beautiful and beautiful as before, as well as new colors to help protect your home materials Not to deteriorate, let's see if we want to paint a new house What to do?

Surface preparation process
This step is the most important step that home-owners must consider as the most important. What are the steps for preparing this surface?

Old color deteriorates : If your original house color Beginning to become dust or have a lot of dirt We should continue to wash and clean the deteriorated surface first. Because if we paint over it without Do not clean the paint, the new paint will stick to the old color that has deteriorated The adhesion will not be good. Because the new color doesn't stick to the surface directly Therefore have a chance Can peel off the future.

If you'd like to develop a lasting first belief, then you have to increase the beauty of the outside of one's home. And, what exactly is the simplest way of achieving your goal? A fantastic professional painting job will be able to help you to incorporate to the curb appeal of your residence. It will make it possible for one to grow the house's value without undertaking costly renovation assignments such as changing the landscape, even adding a swimming pool or even building a terrace.

Cracked marks : This is also important. 100. Every 100 houses have cracks. If it is a large crack, when it rains, there is a chance that water will seep into the crack. Causing water to seep into the house again. Therefore, before repainting Should be ready to fix the cracks first

The original color is peeling : This is also a common problem. By the area that we found The color of the problem. Most of them are At the bottom of the house or in the bathroom That water can seep out through the tiles Many of you may be wondering. Why the paint is 60% nylon due to the humidity in the painted area is high The paint then swelled and peeled off. The other 40% was caused by the unclean surface and painted over. Over time, the paint started to bleed.

Primer painting process
After we finish preparing the surface before painting The next step is Primer painting process Which the primer used to be used should be the old primer Which the number of trips for painting is 1-2 trips. If the old cement foundation was painted Up to full color film No need to paint, but if the surface of some areas are spotted like the color film is not full Then add another amount of 1 trip. The drying time of the color film will be 2-3 hours.

Top coat painting process
The topcoat color is The color we see is on the top floor of the wall. There are many shades to choose from. Finally, however, I like what colors, but the thing I would like to introduce is the color that is used to paint the exterior. Able to be done internally However, interior colors cannot be used to paint exterior because interior colors are not resistant to sunlight or various environmental conditions, therefore should choose the right type of paint for painting. We will do all 2-3 times. The color film will be 2-3 hours as well.