High Alumina EPS Insulating Fire brick for Ceramic Rotary Kiln

Posted by annesheldon on March 19th, 2016

Ceramic rotary kiln mainly have 4 parts: furnace body, burning equipment, ventilating device and kiln inner part transportation device. Among those four parts, the most important part is kiln body.

Kiln body is divided into kiln wall and kiln roof. For kiln wall, usually it will use following materials, it is decided by the kiln different part calcined temperature:

1. For under 1300℃ part, clients could use clay brick.
2. For 1300℃－1400℃, clients could use high alumina brick, High Alumina EPS insulating Firebrick.
3. For 1400℃-1500℃, clients could use silica brick.
4. For 1500℃-1600℃, clients could use magnesia alumina brick.
5. For under 1800℃, clients could use corundum brick.

Changxing High Alumina EPS insulating Firebrick could better reduce kiln inner wall and outside wall heat dissipation with following characters:?
Sintered mainly with supper-fine bauxite, chamotte, and proper additive by a method of EPS ignition loss, Changxing High Alumina EPS Insulating Firebrick has high intensity, low thermal conductivity, excellent thermal stability and very small reheat linear change, as well as out-stands erosion and corrosion resistance etc. This?High Alumina EPS Insulating Firebrick could be well used for ceramic rotary kiln working wall, density: 0.8-1.0g/cm3, using life could be more than 8 months, welcome to contact us!